Military/Aerospace Products

Power Supplies

P230 Rugged/Mil 3U Power Supply Board
Designed for harsh environment applications, the Aitech P230 is a versatile and reliable modular 3U 150 Watt power supply. Its wide input voltage range (18 – 36 Vdc) and 4 ms hold-up time (50 ms with optional capacitor bank module) make the P230 an ideal choice for advanced subsystems.
P221 Rugged/Mil 6U VMEbus Power Supply Board
A versatile and reliable 6U VME power supply providing VME systems with an exceptionally wide input voltage range and all standard VME outputs and assures excellent load and line regulation.
P226 Rugged/Mil 3U VMEbus Power Supply Board

Delivers reliable and sustainable 300W outputs for larger, more complex 6U VMEbus and CompactPCI-based subsystems. The P226 provides an exceptionally wide DC input voltage range, standard +5, +3.3 and +/-12V output voltages, high currents and optional power hold-up while maintaining excellent load and line regulation.

P217 Rugged/Mil 3U VMEbus Power Supply Board
Two (2) DC to DC converter modules are used to provide four (4) isolated outputs with a power rating of up to 140W.

SBCs and General Purpose Processors

Aitech’s C802 is a high-performance 3U CompactPCI SBC (Single Board Computer) for embedded and harsh environment applications.
C162 Core™ i7 6U VME SBC
Aitech’s C162 is a high-performance 6U VME SBC (Single Board Computer) for embedded and harsh environment applications.
C110  MPC8640D 6U VPX SBC
Rugged/mil 6U VPX Single Slot SBC VME and Critical Systems
C901L PowerPC® 7448 at 1.0 Ghz
Rugged/mil 3U CompactPCI single slot SBC - low power version
C6100 High performance Ruggedized PowerPC® SBC
Rugged/mil 6U VME single slot SBC
C101 High Performance 7457 PPC®  VME SBC
Rugged/mil 6U VME single slot SBC MPC7457. For new designs, we recommend the C108.
C5110 High performance Ruggedized PowerPC® SBC
Ruggedized Motorola single slot VME SBC MPC7410 with AltiVec
C102 Dual PowerPC® 7448 VME SBC
Fully loaded dual/single PowerPC® 7448, single slot VME SBC specifically designed to endure harsh environment applications.
C108 PowerPC® 7448 SBC with CANbus 2.0
Rugged/mil 6U VME single slot SBC MPC7448 with AltiVec Technology
C5100 High performance Ruggedized PPC® SBC
Ruggedized Motorola single slot VME SBC MPC750
C106 PowerPC® 7447A SBC with PCI on P0
Rugged/mil 6U VME single slot SBC MPC7447A
C160 Core™ Duo VME SBC
Rugged/mil 6U VME single slot SBC with Intel® L7500 Core™2 Duo 2.2 /1.67 / 1.06 GHz
C105 Rugged/mil PowerPC® VME SBC
Rugged/mil 6U VME single slot SBC - drop in replacement for C5100/C5110
C800 Core™2 Duo CompactPCI SBC
Rugged/mil 3U CompactPCI single slot SBC
C103 Low Power 750GX PowerPC® VME SBC

Rugged/mil 6U VME single slot SBC PowerPC ® 750GX. For new designs, we recommend the C108.

C870 Core™ i7 3U VPX SBC

Rugged/mil 3U VPX Single Slot SBC Core™ i7 at 1.33/2.0/2.53 GHz Processor
C901 PowerPC® 7448 at 1.4 Ghz CompactPCI SBC
Rugged/mil CompactPCI single slot SBC
C100 PowerPC® G4+ 7455 VME SBC

Rugged/mil 6U VME single slot SBC MPC7455. For new designs, we recommend the C108.  For more information about our unique COTS Lifecycle + ™ Program, click here.
 

C903 Low PowerPC® 750FL @ 600Mhz
Rugged/mil 3U CompactPCI SBC
C900 PowerPC® 7447A at 1.0 Ghz cPCI SBC
Rugged/mil 3U CompactPCI single slot SBC

Carrier Cards and Transition Modules

TM100 Transition Module for the C100 VME SBC
Provides standard connection for all C100 G4+ PowerPC® VME SBC I/O Interfaces.
TM106 Transistion Module for C106 VME SBC & CM106 Carrier board
Provides standard connections for C106 PowerPC® VME SBC.
TM900 Transition Module for the C900 CompactPCI SBCs
Provides standard connection for all C900 G4+ PowerPC® CompactPCI SBC I/O interfaces.
CM106 Rugged/mil PMC Carrier Expansion Card
Adds two PMC sites per backplane slot with minimum size, power consumption and cost.
TM800 Transition Module for the C800 CompactPCI SBC
Provides standard connection for all C800 Intel® CompactPCI SBC I/O Interfaces.
TM102 Transistion Module for C102 VME SBC
Provides standard connections for C102 PowerPC® VME SBC I/O Interfaces.
CM870 3U VPX PMC/XMC Carrier Board
The CM870 provides an additional active interface between the 3U VPX backplane and the on-board PMC/XMC module site.
CM900 Rugged/Mil 3U PMC Carrier Expansion Card
Provides additional active interface between the compactPCI backplane and PMC.

Peripheral I/O Boards

C437 ARINC-429 A/D, D/A and Digital I/O VME Board
Provides multiple I/O including ARINC-429, analog to digital, digital to analog, and discretes, as well as an MP3 player with stereo audio output, on a single slot rugged/mil VME board.
C431 A/D, D/A and Digital I/O VME Board
VMEbus slave card providing analog to digital, digital to analog and digital I/O capabilities and designed for harsh environment applications.
C430 Multi I/O Boards

Provides up to 192 I/Os from three (3) sets of digital I/O circuits.

Memory Boards

C212 High Density Flash Memory Board
High capacity VMEbus flash memory board, can be banked into a four-card terabyte of mass storage.

Memory Boards, PMC Mezzanines

M222 High Density Solid State Flash Memory PM
Up to 128 GB NAND flash memory in two (2) banks.
M224 Mass Storage PMC/XMC
Complete SATA mass storage PMC/XMC solution with up to 512 GB NAND flash capacity, supporting over 120MB/sec write and 170 MB/sec read data transfer rates.

PMC Mezzanines

M451 Parallel I/O PMC
A conduction-cooled PCI mezzanine card (PMC) with a 33 MHz 32-bit PCI interface. It provides up to 32 differential bi-directional I/O channels and up to 64 TTL I/O channels.
M453 Analog I/O PMC
Provides analog output and analog input on a cost effective and small industry standard PMC form factor.
M457 Telemetry PCM, Serial and Discrete I/O PMC
A general purpose communication PMC, supporting Pulse Code Modulation (PCM) telemetry, high speed serial communication (Synchronous/Asynchronous) and discrete I/O.
M570 CameraLink™ Frame Grabber
Interfaces with digital still cameras supporting the CameraLinkTM protocol and physical interface.
512 MB DDR3 SDRAM @ up to 700MHz with 128-bit interface
M591 Dual Head Graphics PMC
Based on the advanced ATI Mobility Radeon 9000 (M9) graphics processor. Aitech's M591 dual head display PMC can simultaneously drive two (2) separate displays with two (2) independent graphic streams.
M597 E4690 Graphics and Video PMC
PCI-X 64-bit @ 133 MHz Connectivity
M590 Dual Head Graphics and Video PMC
Based on the advanced ATI Mobility Radeon 9000 (M9) graphics processor, Aitech's M590 dual head graphics and video PMC can simultaneously drive two (2) separate displays with two (2) independent graphic streams and also provide video overlay functionality.
M503 Real Time MPEG 2 Encoder PMC
A real-time MPEG-2 encoder implemented on a standard PMC mezzanine board.
M705 MIL-STD-1553B Multi I/O Communications PMC
Provides multiple avionics style communication protocols (MILSTD-1553, ARINC-429 and Serial I/O). All packed into a small single wide PMC form factor.
M703 MIL-STD-1553B and Serial I/O
Combines a powerful MIL-STD-1553B bus interface with general purpose serial communication UART ports on a standard single slot PMC. For new designs, we recommend the M705.
M706 Avionic Communications PMC
Provides multiple avionics style communication protocols (MIL-STD-1553, ARINC-429, CANbus, and Serial I/O), all packed into a small single-width PMC form factor specifically designed for harsh environments.
M610 Quad Fast Ethernet Interface and Repeater PMC
Provides four (4) 10BASE-T and 100BASE-TX Ethernet ports.
M550 Real Time  MPEG -1 & MPEG-2 Decoder PMC
The MPEG interface is implemented using Zoran’s chip set. The DSP processor is the ZORAN ZR36125, which interfaces the PCIbus through the ZORAN ZR36067 PCIbus multimedia controller.
M410 Servo I/O PMC
Designed to provide three (3) wire Synchro-to-Digital (or four (4) wire Resolver-to-Digital) conversion at 14-bit resolution (minimum) on a cost effective and small industrial PMC form factor.

Rugged Systems

NightHawk RCU™ Rugged Controller / Data Concentrator Unit
Embedded PC-based Remote Interface Unit (RIU) / Data Concentrator Unit (DCU)
A175

Aitech's A175 I/O Expansion Subsystem is a small, compact, Rugged Interface / Data Concentrator Unit (RIU/DCU) for avionics platforms specially designed to expand I/O capabilities of existing avionics systems and support Avionics I/O having large amounts of sensitive signals.